Cloud 9 Cranes & Camera support
C-757.439.2136 Cloud9cranes@aol.
Cloud 9 Cranes & Camera support
C-757.439.2136 Cloud9cranes@aol.
Supertechno Crane 30
This Camera Crane has a telescopic crane arm that measures 9 feet from the fulcrum and can extend out to 30 feet. It comes complete with the Z-remote head and console with hand wheel pan and tilt controls. There is also a joystick pan and tilt control system. There is a third axis and 40' of track available. The ability to telescope the camera in and out during takes while booming the arm up and down will give you camera moves unmatched by any fixed arm crane. Max Lens height 30" underslung.
(The Crane and electronics brain, Z-remote head + new motors and the new Control console have all been replaced or refurbished starting in 2021).
Insert Camera Car
New built Ford 7.5L 425-hp motor and drivetrain with Fitech fuel injection system and onboard computer for all the speed you need.
Dual independent air ride suspension and 4 onboard hydraulic ram leveling jacks to level vehicle for static crane shots or lift off the ground for quick maintenance.
Onboard 300 amp blimpped generator with control console meter bridge in cab. Dual rear axles with 6-wheel braking. 4 built-in hydraulic levelers,
48 Reese hitch receivers surrounding the car at multiple heights. Upper and lower platform roofing systems, 2 bridge plates with 4-way leveling heads speedrail and fittings. RO camera offset and ball leveling head. Safety harnesses and lanyards. Speedrail and fittings.
Process Trailer
The Process trailer is 30 feet long and 8 feet wide expandable to 14 feet wide. Draft height is only 10 inches. Four-wheel independent torsion suspension with16.5" x 16 ply 4450lbs rated tires and electric baking system. Comes with assorted lengths of speedrail and speedrail fittings. Abundent rachet straps, car tie downs, safety harnesses and lanyards. Side decks can easily be removed if roads prohibit there use.
Giraffe Crane Standard
The Giraffe Crane is a very versatile piece of equipment. It's modular and most sections can be carried by one Technician. It has 7 different configuration modes to accommodate remote heads, riding modes up to 2 people or be transformed into a small jib or a dolly on track. It can be built in about a half hour with 2 Technicians and rolls on 4 pneumatic small aircraft tires with steering on both ends for easy movement. lens height underslung [31'] down to [-17']
30' lens height when underslunge
Jimmy-Jib Triangle by Stanton
The Jimmy-Jib is a great tool for many circumstances and can transition from indoor to out door sets efficently. It's modular construction makes it ideal in tight or hard access locations and 1 person can easily carry any piece of the crane. It mounts on a portable 3 wheeled dolly system with a steering and tow handle.
PORTA-JIB, SHOTMAKER DOLLY, CAR & camera mounts
PORTA-JIB
The Porta-Jib is a high-quality machined, billet aluminum and stainless-steel jib and can carry camera payloads up to 100lbs. It can be built in 15 minutes and gives you the smoothest camera moves possible with a small Jib. The reach is 6' from the fulcrum and can perform a 12' swing and approximately a 10' up/down boom. The camera head can be mounted over or underslung, it has a Mitchel plate mount and can receive bowl adaptors. There is a pan and tilt tensioner/lock and a sliding donut weight for quick balance adjustments.
SHOTMAKER DOLLY
This dolly was manufactured by the legendary Shotmaker camera car and crane company. Originally infringing on patients by the Chapman co, they made some design changes to become compliant. The closest thing to a Peewee dolly but it has a double bottom boom arm like the bigger Hybrid dolly to lift a heavier payload. It will perform 5 full booms from bottom to top with 1 charge. It comes complete with a 4-way leveling head with offset, 2 adjustable seats, 2 seat risers, 2 seat offsets, 2 side boards, 1 low and high mode front board, push bar, low mode bracket, 6" & 12" risers and a 2" camera offset.
CAMERA MOUNTS
We can safely mount your camera almost anywhere and have a variety of options to pick from. Custom builds, hostess trays, hood mounts, 4' & 8' suction cup mounts, 4-way leveling heads, ball leveling head, tilt plate, cheese plates, rachet offset head, starter mounts, straps, safeties, assorted speed rail and fittings.